About correct refueling and oil change of SKF imported bearing external equipment

We know that imported bearings play an irreplaceable role as the core components of many mechanical equipment. But as an external device for imported bearings, we must also pay enough attention.

After checking the oil level, if the oil quantity is found to be insufficient, oil should be injected from the fuel filler port or the oil level hole, and the oil level hole is added to the oil level or the oil level reaches the limit position of the scale.

When changing oil, first need to drain oil, the oil temperature should reach 40-50 °C, and the oil should be discharged under disturbance, so that the dirty oil can be drained thoroughly and cleaned. In this way, before the lubricant is discharged, the roller warming oil should be started first, so that the hot oil flows out quickly, and the impurities in the tank are more easily mixed with the oil.

For the transaxle, wheel planetary reducer and exciter oil chamber, because the exposed part of their housing is rotating, it is necessary to start the oil to position the oil hole to the proper position when checking the oil level or draining or refueling.

When checking the oil level or filling the oil, the oil hole can be rotated to the marked horizontal position so that the oil level reaches the oil hole edge.

For more information and purchase please visit: https://www.supplyforever.com