Correct use of woodworking tools

Below, this article will discuss the correct use of woodworking machines from the aspects of jacket size, tool holder, processing thickness and materials.

Woodworking machine tool

 1 . The woodworking machine tool holder has good contact with the jacket; the jacket should be securely clamped to the bracket. If the jacket is used for a long time, the inner hole will be deformed and the jacket must be replaced immediately.

 2, choose the appropriate woodworking engraving machine jacket size; can not choose cross-section, not round, wear, the inner hole has a tapered knife holder, otherwise it will cause the handle vibration, the carving can not achieve the desired effect.

 3. When using a woodworking engraving machine, the thickness of the machining should not exceed the thickness that the cutting edge can cut, otherwise a broken knife will appear.

 4. Always check the toughness of the woodworking machine; if it is blunt, please replace it immediately to avoid breaking the knife.

 5. For cutting of different materials, the cutting speed should be adjusted reasonably.
The recommended cutting speed should be balanced and the speed should be as consistent as possible to achieve better results. If the cutting time is too long, you should not stay and should be done in one go.

 6, the tool should use a special detergent to remove dirt, butter can prevent the tool from rusting.

The tool cannot be polished or changed shape.