Method for eliminating woodworking engraving machine prompting limit alarm

    One possibility is that the parameters in the I/Q status window are disordered. This is a modification. Click the x-axis and press ctrl+shift+alt and then right-click the pop-up window and click “Reverse the point to the direction”. Click the y-axis and press Ctrl+shift+alt then right click on the pop-up window and click “Reverse the point to the direction”, click on the z-axis and press ctrl+shift+alt and then right-click on the pop-up window and click “Reverse the point to the direction”, then close the control. Window, restart the woodworking machine control system.
        Generally speaking, most of the problems of new customers are caused by the emergency stop button on the control box of the woodworking engraving machine. The button will trigger the limit signal, and the control software will prompt the limit alarm. The emergency stop button can be solved. It is also possible that the control software program is corrupted, as long as the control system is reinstalled.