How to carry out daily maintenance of computer engraving machine?

 The computer engraving machine is a computer-controlled engraving machine, which can also be called a computer numerical control engraving machine. It can control engraving plates (wood, stone, MDF, etc.). There are many types of computer engraving machines on the market. The computer engraving machines that dominate the market include wood engraving machines, advertising engraving machines, stone engraving machines, cylindrical engraving machines, laser engraving machines, laser cutting machines, laser marking machines, and glass engraving machines. Metal engraving machine.
    1. The continuous running time is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.
    Second, each time the machine is used, it is necessary to pay attention to cleaning. It is necessary to clean the dust on the platform and the transmission system, and regularly and weekly (weekly) lubricate the transmission system (X, Y, Z three axes). (Note: X, Y, Z three-axis polished rods are maintained with oil; high-speed butter is added to the screw; in winter, if the working environment temperature is too low, the screw, polished rod (square rail or circular guide) should be cleaned with gasoline first. Then add the oil, otherwise it will cause the resistance of the machine transmission part to be too large and cause the machine to be misaligned.)
    Third, the maintenance inspection of the electrical appliance is, must cut off the power supply, until the monitor has no display and the main circuit power indicator is off, before proceeding.